Table of Contents
- Introduction
- Tools and Materials You’ll Need
- Step 1: Plan Your Tile Layout
- Step 2: Prepare the Surface
- Step 3: Mix and Apply Tile Adhesive
- Step 4: Fix the Tiles in Place
- Step 5: Grouting and Finishing
- Pro Tips for Indian Bathrooms
- Buy Bathroom Tiles and Tools in Lucknow at Goel World
- Conclusion
1. Introduction
Tiling a bathroom is not just about looks—it’s about durability, waterproofing, and hygiene. Whether you’re doing a DIY project or supervising a contractor, understanding how to install bathroom tiles like a professional can ensure that your space is both stylish and strong. With proper preparation and technique, your bathroom tiles can last for decades without issues.
2. Tools and Materials You’ll Need
🧰 Tools:
- Tile cutter or wet saw
- Notched trowel
- Level
- Grout float
- Rubber spacers
- Sponge
- Chalk line or laser level
🧱 Materials:
- Wall or floor tiles (ceramic, vitrified, or porcelain)
- Tile adhesive
- Grout (waterproof)
- Tile spacers
- Primer (for old or damp surfaces)
- Sealant (if using porous tiles)
3. Step 1: Plan Your Tile Layout
✅ Measure the bathroom area (floor or wall)
✅ Mark the center point of the area using chalk lines
✅ Dry-lay a few tiles to check spacing and alignment
✅ Avoid having tiny tile pieces at edges—they look unprofessional
✅ Choose a layout style: grid, brick bond, diagonal, or herringbone
Pro Tip: For Indian bathrooms, use anti-skid tiles on the floor and glossy or matte tiles on the wall for better contrast.
4. Step 2: Prepare the Surface
- Ensure the wall or floor is smooth, clean, and dry
- Fix any cracks or uneven areas using mortar
- Apply a primer on concrete or old tile surfaces
- Allow the surface to dry completely before proceeding
In Indian bathrooms, also make sure to create a slight slope for water drainage on the floor.
5. Step 3: Mix and Apply Tile Adhesive
✅ Use a tile adhesive suitable for wet areas (available at Goel World)
✅ Mix adhesive in a bucket as per instructions
✅ Apply with a notched trowel for even distribution
✅ Work in small areas to prevent the adhesive from drying too soon
6. Step 4: Fix the Tiles in Place
✅ Start laying tiles from the center line outward
✅ Use tile spacers between tiles for even joints
✅ Tap gently with a rubber mallet to ensure adhesion
✅ Use a level regularly to check flatness
✅ Wipe off excess adhesive immediately
Let tiles set for 24 hours before grouting.
7. Step 5: Grouting and Finishing
- Mix grout as per package instructions
- Use a grout float to press it into joints
- Clean excess grout with a damp sponge
- Allow grout to cure for 24 hours
- Apply a sealant on grout lines (optional) for extra waterproofing
Pro Tip: Use mould-resistant grout for Indian bathrooms to prevent black patches or fungal growth.
8. Pro Tips for Indian Bathrooms
🛁 Use light-colored tiles to make small bathrooms look bigger
🚿 Install tile borders or inlays to highlight niches or shower zones
🌡️ Allow expansion space along the wall edges (use trims if needed)
🧼 Clean with pH-neutral tile cleaner to maintain the finish
🚽 Avoid using acid on grout lines—it weakens the bonding
9. Buy Bathroom Tiles and Tools in Lucknow at Goel World
Goel World is your one-stop destination for everything you need to install bathroom tiles professionally in Lucknow:
✅ Ceramic, vitrified, anti-skid, and designer bathroom tiles
✅ Tile adhesives, grouts, spacers, trims, and tools
✅ Top brands like Kajaria, Somany, Johnson, and RAK Ceramics
✅ Expert guidance on layout, drainage slope, and tile pairing
✅ 3D layout planning and bulk order discounts
🏢 Visit our showrooms:
- Faizabad Road
- Sushant Golf City
10. Conclusion
Installing bathroom tiles is a step-by-step process that requires planning, precision, and patience. Whether you choose to DIY or hire professionals, following this guide ensures your bathroom is beautiful, waterproof, and long-lasting. For the best tiles and installation materials in Lucknow, trust Goel World to bring quality and design under one roof.
