Table of Contents
- Introduction
- Tools & Materials You’ll Need
- Step 1: Measure and Cut the Granite Slab
- Step 2: Prepare the Base Cabinets or Platform
- Step 3: Dry Fit the Granite Countertop
- Step 4: Apply Adhesive and Set the Slab
- Step 5: Seal the Joints and Surface
- Step 6: Final Polish and Cleanup
- Buy Premium Granite Countertops in Lucknow at Goel World
- Conclusion
1. Introduction
Granite is one of the most durable and beautiful materials for countertops—especially in Indian kitchens, which face daily heat, spills, and wear. Installing a granite countertop requires careful planning, handling, and precision. This guide walks you through the entire installation process, so whether you’re supervising a contractor or planning a DIY, you’ll know what to expect.
2. Tools & Materials You’ll Need
✅ Tools:
- Measuring tape
- Level
- Angle grinder or wet saw
- Diamond blade
- Rubber mallet
- Clamps
- Caulking gun
✅ Materials:
- Granite countertop slab
- Granite adhesive or epoxy
- Shims
- Silicone sealant
- Granite sealer (penetrating type)
- Cleaning cloths
All installation accessories are available at Goel World in Lucknow.
3. Step 1: Measure and Cut the Granite Slab
- Take accurate measurements of the countertop area
- Account for sink and hob cutouts, backsplash space, and overhangs
- Use a wet saw with a diamond blade to cut granite (or get it professionally cut at Goel World)
- Ensure corners are smooth and not too sharp to avoid cracks
Pro Tip: Always double-check measurements—granite is expensive and not easily adjustable once cut.
4. Step 2: Prepare the Base Cabinets or Platform
- Ensure the base is level, strong, and clean
- Use a spirit level to check for flatness
- Fix any uneven surfaces using shims or plywood
- Add a support frame under weak points or near sink cutouts
Granite is heavy—so a sturdy platform is crucial.
5. Step 3: Dry Fit the Granite Countertop
- Place the slab gently on the platform
- Align it with wall and edge clearances
- Check for any uneven gaps or height differences
- Make small adjustments before final fixing
This step helps you visualize the final fit and correct any alignment issues.
6. Step 4: Apply Adhesive and Set the Slab
- Remove the granite temporarily and apply granite adhesive or epoxy on the base
- Apply in dots or strips—not all over the surface
- Carefully place the slab again and press it down evenly
- Use a rubber mallet to gently tap it into place
- Wipe off excess adhesive before it sets
Let the adhesive cure for 24 hours before any heavy use.
7. Step 5: Seal the Joints and Surface
- Fill any gaps or seams with colored epoxy or silicone sealant
- Smooth it with a spatula or finger dipped in soapy water
- Once joints are dry, apply penetrating granite sealer to the surface
- Let it absorb and dry completely—this protects against stains and spills
8. Step 6: Final Polish and Cleanup
- Use a soft cloth and granite polish to buff the surface
- Remove dust, adhesive marks, and finger smudges
- Avoid using acidic cleaners—stick to pH-neutral products
Now your granite countertop is ready to use—strong, shiny, and stain-resistant!
9. Buy Premium Granite Countertops in Lucknow at Goel World
Goel World offers:
✅ A wide variety of granite slabs like Black Galaxy, Tan Brown, Lakha Red, and Saffire Blue
✅ Pre-polished, cut-to-size granite countertops
✅ Matching edge trims, adhesives, and sealants
✅ Expert advice on installation, care, and maintenance
🏢 Visit our showrooms:
- Faizabad Road
- Sushant Golf City
10. Conclusion
Installing a granite countertop is a smart investment in both style and strength for your kitchen or bathroom. By following the right steps—from measurement to sealing—you ensure a durable and beautiful finish. For top-grade granite and installation supplies in Lucknow, trust Goel World—your expert partner in home improvement.
